Payment & Shipping Terms:
|Condition:||New||Chipping Capacity:||8 Inches|
|Flywheel Size:||24 Inches(600mm)||Discharge Hood Rotation:||360 Degrees|
|Mounting System:||3 Point Hitch||Knife Material:||Durable Chromium CR-12|
Tractor Wood Chipper WC - 8M With Two Cutting Blades To Match 25 - 45 HP Tractor
The Fred WC - 8M is best used with a tractor engine power of 25 to 45HP. The advanced shaft driven system pulls the wood into the shredder by two rollers installed in the input section of the shredder. There are two cutting knifes mounted on the 95kg rotor plus a bed knife shredding wood up to 15cm in diameter into 1 to 4cm pieces.
We are the only factory in this price and product range to offer fully balanced rotor discs, to ensure a smooth performance. The discharge hood can be turned by 360° with an adjustable throwing angle to easily fill material onto trailers, containers and big bags. The Fred WC - 8M capacity is up to 7 m³/h depending on the type of wood.
The WC - 8M does not need any hydraulic system and yet offering the same professional performance than expensive hydraulic shredders. A special feature of this shredder is, that it is driven by a 5 belt system with a gear ratio of 2:1, so that the blade rotor turns with twice the speed than the 540rpm PTO shaft. You will get much smaller shredded wood pieces than with other shredders.
The drive shaft driven roller is pulling the wood into the shredder. This makes work fast and easy.
The Cat I 3-point hitch includes additional Cat II bushings, so that you can also connect to larger tractors without any problem.
The shredded wood material is thrown out of the output funnel by an enormous air-suction, generated by the winglets mounted to the fast turning rotor disc. Once shredding difficult material additional ventilation holes can be opened to further increase the air flow.
Contact Person: Carol