Hydraulic Tractor Wood Chipper Farm Wood Mulcher Machinery & Equipment BX62R With Low Price
The chipper has 2 pcs. Hydraulic pick-up rollers driven by the hydraulic system of the tractor. The pickup rollers facilitate the operator's work and increase productivity.
The hydraulic motors have a reverse that allows them to pull the logs back when they are sewn. Reverse allows you to turn hydromotors in both directions.
The chipper is able to process logs of up to 15 cm in diameter.
The chipper has 4 pieces. knives The size of the finished chip is 2-6cm and is not adjustable, as the knives are "tight" screwed with 4 screws on the disc. The chopper is small, its weight is ~ 500kg and can be powered by a tractor with power from 30 horsepower.
The chopper has a 360 degree revolving exhaust pipe, which allows you to change the direction of the chip blowdown.
The chipper is suitable for small farms, choppers - for chipping branches, shrubs and forests.
The sides of the chipper rotor have extra teeth that grind the small branches.
The chipper has 2 hydraulic motors with a reverse function that pulls the branches, shrubs to the chopper rotor.
The chopper rotor has 4 knives, which are tightly attached to the rotor with screws.
The diameter of the chopper rotor is ~ 77 cm, the rotor weight is ~ 90 kg.
The size of the fridge loading hopper is ~ 63x63cm, the loading hole at the rotor is ~ 17x30cm.
The chopper chip blasting pipe height is ~ 188cm, the blower tube is 360 degree.
The chopper is fitted to the tractor with a 3-point hitch, the rotor is driven from the tractor's PTO (540-1000 rpm), hydromotors are driven from the tractor's hydraulic system. The chipper feed rolls have a reverse function.
The required tractor has a capacity of 40 hp and up to 100 hp, but the optimum power and fuel consumption ratio for chipper for the maximum size (diameter 15cm) for logging requires a tractor with a capacity of 60-70 hp.