Chipper BX 92 R
The BX 92 R is designed for grinding branches and tree trunks up to 25 cm in diameter, but the hole width is 35 cm.
The crusher BX 92 R is designed to work with small and agricultural tractors whose power is not 65 hp.
The feeding feeder is equipped with two serrated feed rollers, which force the material to feed the knives, and also by means of a hydraulic valve, the feed rate can be varied by 10 different steps.
The material feed has three positions: feed forward, stop and reverse.
The hydraulic feed of the material is fed from the hydraulic system of the tractor.
The drive of the chipper is driven from the tractor's power take-off shaft.
The resulting chips are ejected through a pipe that rotates 360 ° with respect to the chopper.
The cutting disc has 4 cutting knives with two working faces + 1 counter knife.
In addition, the rotor is equipped with a tearing blade, which breaks the material into smaller pieces (20-50 mm). This element can be removed to get a larger chip size.
ONLY in the machines Stiler additional ventilation of the cutting disk is installed !!!
All the elements necessary for lubrication are protected from dust and easily accessible for servicing the machine.
The crusher has all the fasteners, knives and is ready to work.
As an option, a cardan shaft with a clutch or clutch is offered.
Technical specifications Stiler BX 62 R
Maximum diameter of processing 25 cm or 35 cm wide
Performance 8-12 m3 / hour.
Chips length 20-60 mm.
Drive unit from the tractor's PTO shaft
Maximum tractor power from 90 - 120 hp
Engine power from 50 - 150 hp
Grinding size 15 x 38 cm.
The size of the disk along the impeller 91 cm.
Cutting knives 4 + 1 counter knife.
Steel knife hardened tool steel CR12.
Submission of material hydraulic with 2 rollers
Mounting system three-point hitch
Dimensions A * W * B 167sm.h173sm.h228sm.
External size of the feed hopper 63 x 63 cm.
Rotating ejection tube 360 °
Working speed of the tractor 540/1000 rpm.
Machine Weight 730 kg.